Glexo Hail Micro kit

The Glexo Hail Micro Kit has been specially designed to help technicians with small hail damage. Repairing hail is a difficult job where saving time is of the utmost importance. Since Glexo PDR cold glue can overheat during continuous operation, which affects its performance, the Glexo Hail Micro system includes redundant tabs to enable continuous work. The kit contains a fundamentally new PDR cold glue composition with very high adhesion properties, which allows you to perform repairs with insignificant contact surfaces. All tabs are equipped with Glexo's patented proprietary locking system with O-ring for quick and secure installation. Can be used and are suitable for use with a slide hammer. The recommended weight of the slide hammer is 0.8-1 kg / 1.7-2.2 lb. The kit is equipped with a fundamentally new PDR cold glue with increased adhesion, which allows you to increase productivity when repairing hail damage. The work technique includes the following steps: . Prepare the work surface. The work surface must be free of dirt and grease. For guaranteed high adhesion, it is recommended to use the Glexo Surface Preparation System (SPS). . Install the Glexo Hail Micro tab with applied PDR cold glue on the slide hammer until it stops. . Using a twisting motion, glue the tab in the center of the damage. Use a slide hammer as a lever. Remove damage with a sharp hammer blow. Repeat if necessary. The Glexo Hail Micro kit contains two tabs 10mm /0.39", two tabs 15mm /0.59" and two tabs 20mm /0.79". The kit contains two types of PDR cold glue composition for different working conditions. After the work, the PDR tabs are stored directly with the applied adhesive in the wooden box in which the system is delivered. To prevent adhesion, anti-adhesive films are included in the kit, which must be wrapped around the PDR tabs with the applied composition. The Glexo Hail Micro kit comes with a 1-year warranty. https://www.youtube.com/watch?v=TdeECLjtlYc