Glexo Hail Kit

Glexo Hail Repair Kit - 5 Tabs with 2 types of cold glue. Glexo Hail Kit has been specially designed to help technicians repair hail damage. Hail repair is a difficult job where saving time is very important. Since Glexo's cold glue can overheat during continuous operation, affecting its performance, the Glexo Hail system includes redundant tabs to enable continuous work. All PDR tabs are equipped with Glexo's patented O-ring locking system for quick and secure installation. Can be used and are suitable for use with slide hammers. The recommended weight for the slide hammer is 1.2 kg The work technique includes the following steps: . Prepare the work surface. The work surface must be free of dirt and grease. For guaranteed high adhesion, it is recommended to use the Glexo Surface Preparation System (SPS).. Mount the Glexo Hail tab with applied glue on the slide hammer until it stops.. Form a small cone-shaped bead of PDR cold glue on the tab.. Use a twisting motion and glue the tab in the center of the damage. Use a slide hammer as a lever. 5. Remove damage with a sharp hammer blow. Repeat if necessary. The Glexo Hail kit includes two small 25 mm / 0.98” tabs, two 30 mm / 1.18” tabs and a fold tab for oblong damage. The kit includes two types of PDR cold glue for different temperature conditions. After work, the tabs are stored directly with the applied cold glue in the wooden box in which the system is delivered. To prevent adhesion, anti-adhesive films are included in the kit, which must be wrapped around the tabs with the applied composition. The Glexo Hail kit comes with a 1-year warranty. https://www.youtube.com/watch?v=Zxk146AAASw